• Model: HP-FCOB-12/24V-360D
  • HP-FCOB-12/24V-360D
    HP-FCOB-12/24V-360D HP-FCOB-12/24V-360D HP-FCOB-12/24V-360D HP-FCOB-12/24V-360D
  • ► Product Features


  • 1.Adopt brand LED chip,high brightness,low light decay,lifespan is more than 25000 hours.
    2. Color temperature :2700K、3000K、4000K、6000K.
    3. All of materials are according to RoHS standards.
    4. Easy to install and maintain;can be bent freely; with 3M adhesive tape on the backside.
    5. High color efficiency, uniform illumination.
    6. beam angle 180°.
  • ► Detailed
  • VoitageFPCLED QTY

    RA

    Power

    LM/meter

    ColorPacking
    12/24V DC10mm3609012-14W/m900-1260WW/NW/CW5 m / volume


    Application

    ► Letter signage backlight

    ► Building Decoration

    ► Auditorium walkway lighting

    ► Advertising signs, light box lighting

    ► Landscape decoration


    Installation instruction

    1.Please choose correct power supply for led strips. The total power of the led strip is about 80% of the power supply,and it cannot be fully loaded to ensure that the power supply works at the correct and stable voltage.

    2.We suggest 5 meters/roll for the led strip.If it is over 5 meters, the brightness of LED will vary greatly.If the customer can accept the case, length can be made over 5 meters/roll.

    3. Adhesive tape on the backside of the strip,with its superior adhesive and weather resistance, and can be sticked on any transparent glass, metal and plastic surface. But on some certain surfaces, such as cloth, wood, will affect its function and durability.Please test the adhesion of the led strip before installation.

    4. Please pay more attention to the minimum bending diameter of the led strip is 60mm, so as to avoid direct or indirect damage to FPC and components, which may lead to damages of the strip .

    5. In order to ensure waterproof and anti-corrosive function , after the power line is screwed into the connector, it is recommended to inject the connector with a single component of silica gel (or neutral glass glue, or waterproof grease) and cover the exposed copper wire of the power line for protection.

    6. The non-waterproof led strip shall not be completely exposed for outdoor use. Do not touch or install the strip when it is charged.

    7. It is recommended to use switch power supply that has passed relevant safety regulations (with short circuit protection, over voltage protection and over current protection).


    1588215775394214.jpg

    1588216071816226.jpg

    上一条:No Information
    下一条:SMD3528-120D-12V/24V-8mm
    Hits:  UpdateTime:2020/04/30  【Printing】  【Close

    Address:NO.72 Yongfeng Industrial Park Road, Lunjiao, Shunde District, Guangdong Province, CHINA Tel:0757-28090715 Fax:0757-28090714 E-mail:minnie.m@gdhongpu.com

    Copyrights © 2016 GDHONGPU.COM  Support: RedStar